User guide

Dynamic Host Configuration Protocol DHCP Client command reference
iMG/RG Software Reference Manual (System Administration)
5-64
Description This command lists the options that the DHCP client requests and/or requires from the
DHCP server. These options were set using the dhcpclient interfaceconfig add
requested/required option commands. The following information is displayed:
• Option identification number
• Option identifier (name)
• Requirement status - true for options that were added using the dhcpclient inter-
faceconfig add required option command, false for options added using the dhcpcli-
ent interfaceconfig add requested option command.
Options and their values are detailed in RFC2132.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpclient interfaceconfig client1 list requested options
ID | Identifier | Is option required?
-----|--------------------|---------------------
1 | host-name | true
2 | domain-name | false
------------------------------------------------
See also DHCPCLIENT INTERFACECONFIG ADD REQUESTED OPTION
DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
DHCPSERVER SUBNET ADD OPTION
For information on RFC 2132, see http://www.ietf.org/rfc/rfc2132.txt
5.1.6.1.12 DHCPCLIENT INTERFACECONFIG LIST SENT OPTIONS
Syntax DHCPCLIENT INTERFACECONFIG {<name>|<number>} LIST SENT
OPTIONS
Option Description Default Value
name An existing DHCP client interface. To display cli-
ent interface names, use the
DHCPCLIENT
LIST INTERFACECONFIGS
command.
N/A
number An existing DHCP client interface. To display cli-
ent interface numbers, use the
DHCPCLI-
ENT LIST INTERFACECONFIGS
command.
N/A