User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-63
iMG/RG Software Reference Manual (System Administration)
Example --> dhcpclient interfaceconfig client1 delete requested option 1
See also DHCPCLIENT LIST INTERFACECONFIGS
DHCPCLIENT INTERFACECONFIG ADD REQUESTED OPTION
DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
DHCPCLIENT INTERFACECONFIG CLEAR REQUESTED OPTIONS
5.1.6.1.10 DHCPCLIENT INTERFACECONFIG DELETE SENT OPTION
Syntax DHCPCLIENT INTERFACECONFIG {<name>|<number>} DELETE SENT
OPTION <option number>
Description This command deletes a single option that was previously added to an interfaceconfig
using the DHCPCLIENT INTERFACECONFIG ADD SENT OPTION command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpclient interfaceconfig client1 delete sent option 5
See also DHCPCLIENT LIST INTERFACECONFIGS
DHCPCLIENT INTERFACECONFIG LIST SENT OPTIONS
DHCPCLIENT INTERFACECONFIG ADD SENT OPTION
DHCPCLIENT INTERFACECONFIG CLEAR SENT OPTIONS
5.1.6.1.11 DHCPCLIENT INTERFACECONFIG LIST REQUESTED OPTIONS
Syntax DHCPCLIENT INTERFACECONFIG {<name>|<number>} LIST REQUESTED
OPTIONS
Option Description Default Value
name An existing DHCP client interface. To display client
interface names, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
number An existing DHCP client interface. To display client
interface numbers, use the
DHCPCLIENT LIST
INTERFACECONFIGS
command.
N/A
option number A number that identifies an option that is sent from the
DHCP client to the DHCP server. To display option
numbers, use the
DHCPCLIENT INTERFACE-
CONFIG LIST SENT OPTIONS
command.
N/A