User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-59
iMG/RG Software Reference Manual (System Administration)
See also DHCPCLIENT INTERFACECONFIG ADD REQUESTED OPTION
DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
For information on RFC 2132, see http://www.ietf.org/rfc/rfc2132.txt
5.1.6.1.5 DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
Syntax DHCPCLIENT INTERFACECONFIG {<name>|<number>} ADD REQUIRED
OPTION <option>
Description This command tells DHCP client that it requires a specified option from DHCP server.
The required option is compulsory - if the option was not included in a lease offered by
DHCP server, the DHCP client would ignore the offer.
Options are detailed in RFC 2132.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpclient interfaceconfig client1 add required option domain-name
See also DHCPCLIENT INTERFACECONFIG ADD REQUESTED OPTION
DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
5.1.6.1.6 DHCPCLIENT INTERFACECONFIG ADD SENT OPTION
Syntax DHCPCLIENT INTERFACECONFIG {<NAME>|<NUMBER>} ADD SENT OPTION
{SUBNET-MASK|DHCPLEASE-TIME|DHCP-CLIENT-IDENTIFIER|ROUT-
ERS|DOMAIN-NAME-SERVERS} <VALUE>
Option Description Default Value
name An existing DHCP client interface. To display cli-
ent interface names, use the
DHCPCLIENT
LIST INTERFACECONFIGS
command.
N/A
number An existing DHCP client interface. To display cli-
ent interface numbers, use the
DHCPCLI-
ENT LIST INTERFACECONFIGS
command.
N/A
option A text string that identifies a DHCP server con-
figuration option.
N/A