User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-57
iMG/RG Software Reference Manual (System Administration)
Example --> dhcpclient add interfaceconfig config1 ip1
See also DHCPCLIENT LIST INTERFACECONFIGS
IP LIST INTERFACES
IP SET INTERFACE DHCP
5.1.6.1.2 DHCPCLIENT CLEAR INTERFACECONFIGS
Syntax DHCPCLIENT CLEAR INTERFACECONFIGS
Description This command deletes all existing DHCP client interface configurations.
Example --> dhcpclient clear interfaceconfigs
See also DHCPCLIENT LIST INTERFACECONFIGS
5.1.6.1.3 DHCPCLIENT DELETE INTERFACECONFIG
Syntax DHCPCLIENT DELETE INTERFACECONFIG {<name>|<number>}
Description This command deletes a single DHCP client interface configuration.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An arbitrary name that identifies the client interface. It
can be made up of one or more letters or a combina-
tion of letters and digits, but it cannot start with a digit.
N/A
ip interface An IP address or An existing IP interface. The interface
must have DHCP enabled. To display interface names,
use the IP LIST INTERFACES command.
N/A