User guide

DHCP Client command reference Dynamic Host Configuration Protocol
5-55
iMG/RG Software Reference Manual (System Administration)
5.1.6 DHCP Client command reference
This section describes the commands available on the AT-RG624/634 Residential Gateway to enable, configure
and manage the DHCP Client module.
5.1.6.1 DHCP client CLI commands
The table below lists the DHCP client commands provided by the CLI:DHCP client CLI commands
TABLE 5-2 DHCP client CLI commands
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E Modular
ADSL
A
ADSL
B
ADSL
C
DHCPCLIENT ADD INTERFACECONFIG
XXXXX X X X X
DHCPCLIENT CLEAR INTERFACECONFIGS
XXXXX X X X X
DHCPCLIENT DELETE INTERFACECONFIG
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG ADD REQUESTED OPTION
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG ADD REQUIRED OPTION
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG ADD SENT OPTION
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG CLEAR SENT OPTIONS
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG CLEAR REQUESTED OPTIONS
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG DELETE REQUESTED OPTION
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG DELETE SENT OPTION
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG LIST REQUESTED OPTIONS
XXXXX X X X X
DHCPCLIENT INTERFACECONFIG LIST SENT OPTIONS
XXXXX X X X X
DHCPCLIENT LIST INTERFACECONFIGS
XXXXX X X X X
DHCPCLIENT SET BACKOFF
XXXXX X X X X
DHCPCLIENT SET INTERFACECONFIG AUTOIP ENABLED|DISABLED
XXXXX X X X X
DHCPCLIENT SET INTERFACECONFIG CLIENTID
XXXXX X X X X
DHCPCLIENT SET INTERFACECONFIG DEFAULTROUTE ENABLED|DISABLED
XXXXX X X X X