User guide

Dynamic Host Configuration Protocol DHCP Server command reference
iMG/RG Software Reference Manual (System Administration)
5-54
Example --> dhcpserver set maxleasetime 90000
See also DHCPSERVER SET DEFAULTLEASETIME
5.1.5.1.84 DHCPSERVER SHOW
Syntax DHCPSERVER SHOW
Description This command displays the following global configuration information about the DHCP
server:
• Status of the server (enabled/disabled)
• Global default lease time
• Global maximum lease time
• Bootp requests setting (enable/disable)
• Allow unknown clients setting (enable/disable)
Example --> dhcpserver show
Global DHCP Server Configuration:
Status: ENABLED
Default lease time: 43200 seconds
Max. lease time: 86400 seconds
Allow BOOTP requests: true
Allow unknown clients: true
See also DHCPSERVER SHOW SUBNET
5.1.5.1.85 DHCPSERVER UPDATE
Syntax DHCPSERVER UPDATE
Description This command updates the DHCP server configuration. Changes made to the server
configuration will not take effect until this command has been entered.
Example --> dhcpserver update
dhcpserver: Reset request acknowledged. Reset imminent.
Option Description Default Value
maxleasetime The maximum time (in seconds) for a lease when
the client requesting the lease does not ask for a
specific expiry time
86400