User guide

DHCP Server command reference Dynamic Host Configuration Protocol
5-53
iMG/RG Software Reference Manual (System Administration)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver set bootp disabled
5.1.5.1.82 DHCPSERVER SET DEFAULTLEASETIME
Syntax DHCPSERVER SET DEFAULTLEASETIME <defaultleasetime>
Description This command sets the global default lease time for DHCP server.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver set defaultleasetime 50000
See also DHCPSERVER SET SUBNET MAXLEASETIME
5.1.5.1.83 DHCPSERVER SET MAXLEASETIME
Syntax DHCPSERVER SET MAXLEASETIME <maxleasetime>
Description This command sets the global maximum lease time for DHCP server.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
enabled DHCP server responds to BOOTP queries. Enabled
disabled DHCP server does not respond to BOOTP queries.
Option Description Default Value
defaultleasetime The default time (in seconds) assigned to a lease if
the client requesting the lease does not ask for a
specific expiry time.
43200