User guide

Dynamic Host Configuration Protocol DHCP Server command reference
iMG/RG Software Reference Manual (System Administration)
5-52
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver set allowunknownclients disabled
See also DHCPCLIENT SET INTERFACECONFIG CLIENTID
5.1.5.1.79 DHCPSERVER LIST HOST
Syntax DHCPSERVER LIST HOSTS
Description This command lists the hosts assigned from the server.
Example --> dhcpserver list hosts
5.1.5.1.80 DHCPSERVER SET ALLOWUNKNOWNCLIENTS
Syntax DHCPSERVER SET ALLOWUNKNOWNCLIENTS {ENABLED|DISABLED}
Description This command enables/disables the dynamic assignment of addresses to unknown clients.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver set allowunknownclients disabled
See also DHCPCLIENT SET INTERFACECONFIG CLIENTID
5.1.5.1.81 DHCPSERVER SET BOOTP
Syntax DHCPSERVER SET BOOTP {ENABLED|DISABLED}
Description This command determines whether DHCP server can respond to BOOTP requests.
Option Description Default Value
enabled IP addresses are dynamically assigned to unknown clients Enabled
disabled IP addresses are not dynamically assigned to unknown clients
Option Description Default Value
enabled IP addresses are dynamically assigned to unknown clients Enabled
disabled IP addresses are not dynamically assigned to unknown clients