User guide

DHCP Server command reference Dynamic Host Configuration Protocol
5-39
iMG/RG Software Reference Manual (System Administration)
Description This command deletes a single option that was created using the DHCPSERVER SUB-
NET ADD OPTION command. Once deleted, the option will no longer be given out by
the DHCP server.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver subnet sub1 delete option 2
See also DHCPSERVER ADD SUBNET
DHCPSERVER CLEAR SUBNETS
DHCPSERVER LIST SUBNETS
DHCPSERVER SUBNET LIST OPTIONS
5.1.5.1.56 DHCPSERVER SUBNET DELETE POOL
Syntax DHCPSERVER SUBNET <name> DELETE POOL <poolname>
Description This command deletes a single pool that was created using the DHCPSERVER SUBNET
ADD POOL command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver subnet sub1 delete pool mypool
Option Description Default Value
name An existing subnet. To display subnet names, use the
DHCPSERVER LIST SUBNETS command.
N/A
number An existing subnet. To display subnet numbers, use the
DHCPSERVER LIST SUBNETS command.
N/A
option number An existing option. To list all existing options, use the
DHCPSERVER SUBNET LIST OPTIONS com-
mand.
N/A
Option Description Default Value
name An existing subnet. To display subnet names, use the
DHCPSERVER LIST SUBNETS command.
N/A
poolname Name/Id of the pool to be deleted from the subnet. N/A