User guide

Dynamic Host Configuration Protocol DHCP Server command reference
iMG/RG Software Reference Manual (System Administration)
5-32
Example --> dhcpserver set subnet sub1 hostisdefaultgateway enabled
See also DHCPSERVER SET SUBNET HOSTISDNSSERVER
5.1.5.1.45 DHCPSERVER SET SUBNET HOSTISDNSSERVER
Syntax DHCPSERVER SET SUBNET {<name>|<number>} HOSTISDNSSERVER
{ENABLED | DISABLED}
Description This command tells the DHCP server to give out its own host IP address as the DNS
server address. This is useful when combined with DNS Relay.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An existing subnet. To display subnet names, use the
DHCPSERVER LIST SUBNETS command.
N/A
number An existing subnet. To display subnet numbers, use
the
DHCPSERVER LIST SUBNETS command.
N/A
enabled Allows DHCP server to give out its own host IP
address as the default gateway address.
disabled
disabled Disallows DHCP server from giving out its own host
IP address as the default gateway address.
Option Description Default Value
name An existing subnet. To display subnet names, use
the
DHCPSERVER LIST SUBNETS com-
mand.
N/A
number An existing subnet. To display subnet numbers, use
the
DHCPSERVER LIST SUBNETS com-
mand.
N/A
enabled Allows DHCP server to give out its own host IP
address as the DNS server address.
disabled
disabled Disallows DHCP server from giving out its own
host IP address as the DNS server address.