User guide

System command reference System Management
1-17
iMG/RG Software Reference Manual (System Configuration)
SYSTEM CONFIG SET
SYSTEM CONFIG SHOW
1.1.5.1.4 SYSTEM CONFIG DELETE
Syntax SYSTEM CONFIG DELETE <filename>
Description This command deletes the configuration file named <filename> from the flash.
It’s not possible delete a configuration file that has been set as bootstrap configuration
file. In this case it’s necessary change the bootstrap configuration file (for example setting
it to none) before deleting it.
To retrieve the configuration file list use the SYSTEM CONFIG LIST command. To dis-
play the current bootstrap configuration file use the SYSTEM CONFIG SHOW com-
mand.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> system config delete myfile.cfg
See also SYSTEM CONFIG CREATE
SYSTEM CONFIG GET
SYSTEM CONFIG LIST
SYSTEM CONFIG SET
SYSTEM CONFIG SHOW
1.1.5.1.5 SYSTEM CONFIG GET
Syntax SYSTEM CONFIG GET <url>
Description This command retrieves a configuration file from a remote TFTP or FTP server and save
it permanently in the configuration file list.
If the retrieved configuration file has the same filename as an existing file, the new file will
overwrite the old one even if it is the bootstrap configuration file without warning. On a
Option Description Default Value
FILENAME The name of an existing configuration file. The following
filenames are reserved and cannot be used:
factory
none
N/A