User guide

DHCP Server command reference Dynamic Host Configuration Protocol
5-27
iMG/RG Software Reference Manual (System Administration)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver sharednetwork myshared delete sharedsubnet mysubnet
5.1.5.1.36 DHCPSERVER SHAREDNETWORKS LIST SHAREDSUBNET
Syntax DHCPSERVER SHAREDNETWORKS <NAME> LIST SHAREDSUBNET
Description This command lists the information about existing DHCP shared subnet in ashared net-
work
Example --> dhcpserver sharednetorks myshare list sharedsubnet
5.1.5.1.37 DHCPSERVER ADD SUBNET
Syntax DHCPSERVER ADD SUBNET
<name> <ipaddress> <netmask> [<startaddr>
<endaddr>]
Description This command creates a subnet that stores a pool of IP addresses. The DHCP server can
allocate IP addresses from this pool to clients on request.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name The name of the shared network. N/A
subnetname Subnet name N/A
Option Description Default Value
name An arbitrary name that identifies the subnet. It can
be made up of one or more letters or a combination
of letters and digits, but it cannot start with a digit.
N/A
ipaddress The IP address of the subnet in the format:
192.168.102.3
N/A