User guide

DHCP Server command reference Dynamic Host Configuration Protocol
5-23
iMG/RG Software Reference Manual (System Administration)
Note: You are not allowed to create a fixed host mapping with an IP address that is already present inside a
configured, dynamic IP range on a subnet. The reverse is also forbidden; you cannot add addresses into
a dynamic IP range that are already configured as fixed host addresses. The CLI will display a warning if
you attempt to do this.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver set fixedhost myhost ipaddress 192.168.219.2
See also DHCPSERVER LIST FIXEDHOSTS
DHCPSERVER SET FIXEDHOST MACADDRESS
5.1.5.1.26 DHCPSERVER SET FIXEDHOST DEFAULTLEASETIME
Syntax DHCPSERVER SET FIXEDHOST <host name> DEFAULTLEASETIME
<defaultleasetime>
Description This command sets the default leas time that will be allocated to a DHCP client by the
fixed host mapping.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver set fixedhost myhost defaultleasetime 3600
Option Description Default Value
host name An existing fixedhost. To display fixedhost names, use
the
DHCPSERVER LIST FIXEDHOSTS com-
mand.
N/A
ip address The IP address assigned to a DHCP client based on the
client’s MAC address, in the format: 192.168.102.3
N/A
Option Description Default Value
host name An existing fixedhost. To display fixedhost names, use
the
DHCPSERVER LIST FIXEDHOSTS com-
mand.
N/A
defaultleasetime The default time for the lease of a specific fixed host N/A