User guide

System Management System command reference
iMG/RG Software Reference Manual (System Configuration)
1-16
Example --> system add login ckearns "temporary contractor"
See also SYSTEM DELETE LOGIN
SYSTEM LIST LOGINS
1.1.5.1.3 SYSTEM CONFIG CREATE
Syntax SYSTEM CONFIG CREATE <filename>
Description This command creates a configuration file named <filename> storing the current running
system configuration and save permanently it in the flash.
It is possible create up to two configuration files. If a configuration with the same name
already exists, the new one will overwrite the previous configuration file without warn-
ing.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> system config create myfile
See also SYSTEM CONFIG DELETE
SYSTEM CONFIG GET
SYSTEM CONFIG LIST
Option Description Default Value
NAME A unique login name made up of more than one charac-
ter that identifies an individual user and lets the user
access the system.
N/A
COMMENT An optional comment about the user that is displayed
when you type the commands SYSTEM LIST USERS and
SYSTEM LIST LOGINS.
Blank (No com-
ment added)
Option Description Default Value
FILENAME The name of the file where the current running configu-
ration is saved. The following filenames are reserved and
cannot be used:
factory
none
N/A