User guide

Dynamic Host Configuration Protocol DHCP Server command reference
iMG/RG Software Reference Manual (System Administration)
5-18
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver delete exclude onepc
5.1.5.1.16 DHCPSERVER LIST EXCLUDES
Syntax DHCPSERVER LISTEXCLUDES
Description This command lists the existing DHCP server excluded IP address. It displays the follow-
ing information:
• DHCP server interface ID number
• Excluded name
• Excluded IP address
Example --> dhcpserver lise excluded
DHCP server Excluded IP Addresses:
ID | Name | IP address
-----|------------|------------------
1 | onepc | 10.10.10.4
-------------------------------------
5.1.5.1.17 DHCPSERVER ADD INTERFACE
Syntax DHCPSERVER ADD INTERFACE <ipinterface>
Description This command sets DHCP server to operate on a specific IP interface. The IP interface is
defined as a DHCP server IP interface. By setting DHCP relay to operate on other inter-
faces, you can simultaneously use DHCP server and relay in your configuration.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name The existing name of excluded IP address
obtained from the command dhcpserver list
excluded
N/A