User guide

DHCP Server command reference Dynamic Host Configuration Protocol
5-15
iMG/RG Software Reference Manual (System Administration)
Example --> dhcpserver set class myclass vendor-class myvendorclass
5.1.5.1.8 DHCPSERVER SHOW CLASS
Syntax DHCPSERVER SHOW CLASS <name>
Description This command shwo DHCP server class informations.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> dhcpserver shwo class myclass
DHCP Server Class: myclass
Class : myclass
UserClassData : myuserclass
VendorClassData:
5.1.5.1.9 DHCPSERVER CLASS ADD OPTION
Syntax DHCPSERVER CLASS <name> ADD OPTION <identifier> <value>
Description This command add option on DHCP server class.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name The name of the class N/A
uvendorclassdata Vendo calls identifier string to be matched N/A
Option Description Default Value
name The name of the class N/A