User guide

Firewall Firewall command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-126
•Host mask address
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> firewall list validators ext-int
Firewall Host Validators:
ID | Name | Direction | Host IP | Mask
-------------------------------------------------------------
1 | v1 | both | 192.168.103.2 | 255.255.255.0
2 | v2 | inbound | 192.168.103.1 | 255.255.255.0
-------------------------------------------------------------
See also FIREWALL ADD VALIDATOR
FIREWALL SHOW VALIDATOR
FIREWALL LIST POLICIES
4.3.2.0.21 FIREWALL SHOW VALIDATOR
Syntax FIREWALL SHOW VALIDATOR <name> <policyname>
Description This command displays information about a single validator that was added to firewall
policy using the FIREWALL ADD VALIDATOR command. The following validator infor-
mation is displayed:
•Validator name
• Direction (inbound, outbound or both)
•Host IP address
•Host mask address
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Option Description Default Value
policyname An existing firewall policy. To display policy names, use the
FIREWALL LIST POLICIES command.
N/A
Option Description Default Value
name An existing validator. To display validator names, use the
FIREWALL LIST VALIDATORS command.
N/A