User guide

Firewall Firewall command reference

iMG/RG Software Reference Manual (IPNetwork Functions)

4-122

•Portfilter ID number

•Portfilter name

• Type - port number range or specified port number

• Port range used by the specified TCP or UDP protocol (e.g., 53 for DNS, 25 for

SMTP). For non-TCP/UDP protocols, the port range is set to 0-0.

• In - displays the inbound permission setting (true or false)

• Out- displays the outbound permission setting (true or false)

• Raw - displays whether the portfilter uses a non-TCP/UDP protocol (true or false)

• TCP - displays whether the portfilter uses a TCP protocol (true or false)

• UDP - displays whether the portfilter uses a UDP protocol (true or false)

Options The following table gives the range of values for each option that can be specified with

this command and a Default Value (if applicable).

Example --> firewall list portfilters ext-int

Firewall Port Filters:

ID | Name | Prot | Status | allow

-------------------------------------------

1 | pf2 | TCP | enabled | true

2 | pf3 | UDP | enabled | true

3 | pf4 | 92 | disabled| false

-------------------------------------------