User guide

Firewall command reference Firewall
4-115
iMG/RG Software Reference Manual (IPNetwork Functions)
Example --> firewall show policy ext-dmz
Firewall Policy: ext-dmz
Interface Type 1: external
Interface Type 2: dmz
Allow Only Validator: false
See also FIREWALL LIST POLICIES
See also firewall set securitylevel
4.3.2.0.8 FIREWALL LIST PROTOCOL
Syntax firewall list protocol
Description This command lists the. The number of a non-TCP or non-UDP protocol. Protocol num-
bers can be found at
http://www.ietf.org/rfc/rfc1700.txt.
Example --> firewall list protocol
Assigned Internet Protocol Numbers
see RFC 1700 "Assigned Numbers"
section "Protocol Numbers" pages 7 - 9
1 ICMP Internet Control Message
2 IGMP Internet Group Management
3 GGP Gateway-to-Gateway
4 IP IP in IP (encapsulation)
6 TCP Transmission Control
8 EGP Exterior Gateway Protocol
9 IGP any private interior gateway
17 UDP User Datagram
46 RSVP Reservation Protocol
47 GRE General Routing Encapsulation
89 OSPFIGP OSPFIGP
92 MTP Multicast Transport Protocol
94 IPIP IP-within-IP Encapsulation Protocol
See also Firewall add portfilter, firewall set portfilter
Option Description Default Value
name An existing firewall policy. To display policy names, use
the FIREWALL LIST POLICIES command.
N/A