User guide

Security Security command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-104
4.2.7.1.58 SECURITY SET AEMLOGGINGINTERVAL
Syntax SECURITY SET AEMLOGGINGINTERVAL <number>
Description This command sets the alarm logging interval value
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security set IDS MaxPING 25
See also security show
4.2.7.1.59 SECURITY SHOW IDS
Syntax SECURITY SHOW IDS
Description This command displays the following information about IDS settings:
• IDS enabled status (true or false)
• Blacklist status (true or false)
• Use Victim Protection status (true or false)
• DOS attack block duration (in seconds)
• Scan attack block duration (in seconds)
• Victim protection block duration (in seconds)
• Maximum TCP open handshaking count allowed (per second)
• Maximum ping count allowed (per second)
• Maximum ICMP count allowed (per second)
Example --> security show IDS
Firewall IDS:
IDS Enabled: false
Use Blacklist: false
Use Victim Protection: false
Dos Attack Block Duration: 1800
Scan Attack Block Duration: 86400
Malicious Attack Block Duration: 86400
Option Description Default Value
number The interval between each AEM logging message. 5