User guide

Security command reference Security
4-95
iMG/RG Software Reference Manual (IPNetwork Functions)
------------------------------------------------------------------------------------
yahoo-vi.. | ip0 | 192.168.1.1 | 0.0.0.0 | 17 | 5000 | 500 | true
------------------------------------------------------------------------------------
4.2.7.1.41 SECURITY SHOW WAITINGSESSION
Syntax SECURITY SHOW WAITINGSESSION <name
Description This command displays information about a single waitingsession that was added to the
Security module using the security add waitingsession command. The following informa-
tions are displayed:
• Waiting Session Name: Waiting Session Name.
•Interface Name:
Specify the external/dmz interface over which traffic is expected.
•Local Real IP Address: Specify the IP address of the local host which is expecting this traffic.
• Remote IP Address: Optionally specify the IP address of the remote host from which the
traffic is expected.
•Protocol: The Protocol type- TCP/ UDP.
•Local Real Port: Specify the TCP/UDP port on which the traffic reaches the router.
• Local Mapping Port: Specify the TCP/UDP port on local host which this traffic is to be re-
directed to.
• Remote Port: The remote port from which this traffic is expected, or wildcard.
• Duration: Optionally specify the duration after which not to expect this traffic.
• Reusable: Specify whether the waiting-session should be enabled.
• Enabled: Specify whether the waiting-session should be disabled.
• Description: Comment provided to describe this particular traffic, if any.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security show waitingsession yahoo-video
Waiting Session Name: yahoo-video
Interface Name: wan
Local Real IP Address: 192.168.0.1
Remote IP Address: 0.0.0.0
Option Description Default Value
name Name of the waitingsession N/A