User guide

Security command reference Security
4-93
iMG/RG Software Reference Manual (IPNetwork Functions)
Example --> security add waitingsession yahoo-video wan 192.168.0.1 17 500 5000 60 enabled
comment yahoouser wants video remoteip 172.26.4.1
4.2.7.1.38 SECURITY DELETE WAITINGSESSION
Syntax SECURITY DELETE WAITINGSESSION <name>
Description This command deletes the waitingsession added to a security module.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security delete waitingsession yahoo-video
4.2.7.1.39 SECURITY SET WAITINGSESSION
Syntax
SECURITY SET WAITINGSESSION <name> <local_real_port><duration>
(ENABLED |DISAB
Description This command sets various attributes of the waitingsession.
local_mapping_port Specify the TCP/UDP port on local host which this
traffic is to be re-directed to
N/A
local_real_port Specify the TCP/UDP port on which the traffic
reaches the router
N/A
idle_timeout Optionally specify the time-out after which not to
expect this traffic
N/A
enabled Specify whether the waiting-session should be
enabled
N/A
disabled Specify whether the waiting-session should be dis-
abled
N/A
comment Optionally provide a comment for this traffic N/A
remoteip Optionally specify the IP address of the remote host
from which the traffic is expected
N/A
Option Description Default Value
name Name of the waitingsession N/A
Option Description Default Value