User guide

Security Security command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-84
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security add trigger t2 netmeeting
See also SECURITY LIST TRIGGERS
SECURITY ADD TRIGGER TCP|UDP
4.2.7.1.22 SECURITY CLEAR TRIGGERS
Syntax security clear triggers
Description This command deletes all triggers that were added to the Security module using the
security add trigger commands.
Example --> security clear triggers
See also security delete trigger
4.2.7.1.23 SECURITY DELETE TRIGGER
Syntax SECURITY DELETE TRIGGER <name>
Description This command deletes a single trigger that was added to the Security module using the
security add trigger commands.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security delete trigger t2
See also SECURITY LIST TRIGGERS
SECURITY CLEAR TRIGGERS
4.2.7.1.24 SECURITY LIST TRIGGERS
Syntax security list triggers
Option Description Default Value
name An arbitrary name that identifies the trigger. It can be
made up of one or more letters or a combination of let-
ters and digits, but it cannot start with a digit.
N/A
Option Description Default Value
name An existing trigger. To display trigger names, use the
security list trigger command.
N/A