User guide

Security Security command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-80
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security add mgmt-station ISP 192.168.1.1 255.255.255.0 17 26 10
See also security set mgmt-station
4.2.7.1.17 SECURITY DELETE MGMT-STATION
Syntax SECURITY DELETE MGMT-STATION <name>
Description This command deletes a single Management Station that was added to the Security
module using the SECURITY ADD MGMT-STATION command.
Option Description Default Value
name An arbitrary name that identifies the management sta-
tion. It can be made up of one or more letters or a
combination of letters and digits, but it cannot start
with a digit.
N/A
start_addr The first remote host IP address in the range allowed. N/A
end_addr The last remote host IP address in the range allowed. N/A
address A specific IP address in the remote subnet allowed. N/A
mask The mask defining the remote subnet allowed. N/A
transport_type The number of the transport type used, e.g., TCP = 6,
UDP = 17, wildcard = 255.
N/A
port The port number used. This is only effective if the
transport_type is set to 6 (TCP) or 17 (UDP). The wild-
card is 65535.
N/A
idle_timeout The idle time (in minutes). If no sessions are created by
the
Management Station within this setting the Sta-
tion
is disabled. If a session is created, that session uses
the idle time set and the Station is not disabled until the
session expires.
0 (no timeout)