User guide

Security command reference Security
4-77
iMG/RG Software Reference Manual (IPNetwork Functions)
Security enabled.
Firewall disabled.
Firewall security level: none.
NAT disabled.
Intrusion detection is disabled.
Security logging is enabled.
Session logging disabled.
Blocking logginisabled.
Intrusion logging disabled.
Security AEM Logging Interval: 5 Sec(s).
See also SECURITY ENABLE | DISABLE
FIREWALL SET SECURITYLEVEL
4.2.7.1.11 SECURITY ADD INTERFACE
Syntax SECURITY ADD INTERFACE <name> {EXTERNAL | INTERNAL | DMZ}
Description This command adds an existing IP interface to the Security package to create a security
interface, and specifies what type of interface it is depending on how it connects to the
network.
Once you have added security interfaces, you can use them in the NAT and/or Firewall
configurations.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security add interface ip1 internal
See also IP LIST INTERFACES
See also Firewall command reference
NAT CLI commands
Option Description Default Value
name An existing IP interface. To display interface names, use the ip
list interfaces command.
N/A
external An interface that connects to the external network. N/A
internal An interface that connects to the internal network N/A
dmz An interface that connects to the de-militarized zone, DMZ N/A