User guide

Security Security command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-72
4.2.7.1.2 SECURITY ENABLE | DISABLE
{LOGGING|BLOCKINGLOG| INTRUSIONLOG| SESSIONLOG}
Syntax
security {enable | disable} {logging|blockinglog|intrusionlog|sessionlog}
Description This command enables/disables logging of:
• logging activit
• blocking activity
• intrusion activity
• session events
This command is not present on FIBER A,B,C devices
Note: Before you can log intrusion, blocking and session events, logging module must be enabled
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> security enable blockinglog
See also firewall set securitylevel
4.2.7.1.3 SECURITY ENABLE | DISABLE {BLOCKINGLOG| INTRUSIONLOG| SESSIONLOG}
CONSOLEPRINTING
Syntax
security {enable | disable} {blockinglog|intrusionlog|sessionlog} CONSOLEPRINTING
Description This command allows you to set whether blocking, intrusion or session logging is sent to
the console instead of to the event log. Note that you must first enable logging using the
command security enable|disable logging|blockinglog|intrusionlog|sessionlog. This com-
mand is not present of FIBER A,B,C devices
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Option Description Default Value
enabled Logging is enabled. N/A
disabled Logging is disabled.
logging generic logging module reference Enabled
blockinglog Details of blocking activity are logged. Enabled
intrusionlog Details of intrusion activity are logged. Disabled
sessionlog Details of session events are logged. Disabled