User guide

File system System Management
1-5
iMG/RG Software Reference Manual (System Configuration)
1.1.2.3 Split management
Split management is part of the NMS provisioning framework.
Split management allows the end-user to perform configurations via WEB interface while the management of
the system is kept under the network administrator control (NMS).
When split management is enabled, a login user is created with login “admin” and default password “admin”.
The end-user can access to WEB pages to configure wireless parameters and to change his own password.
The end-user cannot configure other system parameters like security, dhcpserver and he cannot execute firm-
ware upgrade. These configuration changes are still under the network administrator control.
When split management is disabled, the end-user doesn’t have access to the system WEB pages at all.
1.1.3 File system
The file system differs according to the gateway memory capacity and the presence or absence of an EEPROM.
There are three different file system cofigurations:
• Gateways with 4Mbytes of FLASH (Fiber A, Fiber B, Fiber C)
• Gateways with 8MBytes of FLASH with EEPROM (Modular, ADSL A)
• Gateways with 8MBytes of FLASH without EEPROM (Fiber E, ADSL B, ADSL C)
engineer/
superuser
enabled Status pages,
Statistics,
Wireless settings (basic & advanced),
Security (NAT and Firewall) Settings
DHCP server settings
Routing configuration
User password change
Firmware Upgrade
Configuration saving
access
level
mayConfigureWeb Allowed CLI operations