User guide

IP TCP/IP command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-56
Send V1 : false
Accept V2 : false
Send V2 : false
Send Multicast : false
Example Virtual IP interface
-> ip show interface ip1
IP Interface: ip1 - virtual [ip0]
IPaddr : 192.168.10.1
Mask : 255.255.255.0
Rx Packet Count : 0
Tx Packet Count : 0
MTU : 1500
Dhcp : false
TCP MSS Clamp : false
Source Addr Validation : false
Icmp Router Advertise : false
Accept V1 : false
Send V1 : false
Accept V2 : false
Send V2 : false
Send Multicast : false
See also IP SHOW
IP SHOW ROUTE
IP LIST INTERFACES
4.1.8.2.66 IP SHOW ROUTE
Syntax IP SHOW ROUTE {<name>|<number>}
Description This command displays the following information about a named route:
• Destination IP address
• Netmask address
•Gateway IP address
• Cost: the number of hops counted as the cost of the route
•Interface name