User guide

TCP/IP command reference IP
4-55
iMG/RG Software Reference Manual (IPNetwork Functions)
4.1.8.2.65 IP SHOW INTERFACE
Syntax IP SHOW INTERFACE {<name>|<number>}
Description This command displays the following information about a named interface:
• IP address and netmask address (if set). For virtual interfaces, the name of the real
interface that the virtual interface is attached to is also displayed.
• MTU (Maximum Transmission Unit)
•Status of DHCP
• Status of TCP MSS Clamp
• Status of RIP send and RIP accept
• Status of RIP multicast
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example Real IP interface
--> ip show interface ip0
IP Interface: ip0
IPaddr : 10.17.90.153
Mask : 255.255.255.0
Rx Packet Count : 210
Tx Packet Count : 5
MTU : 1500
Dhcp : true
TCP MSS Clamp : false
Source Addr Validation : false
Icmp Router Advertise : false
Accept V1 : false
Option Description Default Value
name An existing IP interface. To display interface names, use
the IP LIST INTERFACES command.
N/A
number An existing IP interface. To display interface numbers,
use the IP LIST INTERFACES command. The number
appears in the first column under the heading ID.
N/A