User guide

IP TCP/IP command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-54
Example --> ip set ttl 60
See also ip show
4.1.8.2.63 IP SHOW
Syntax ip show
Description Shows current RIP configuration and any other information global to the router.
Example --> ip show
Global IP configuration:
Host routes: false
Poison reverse: false
Authentication: false
Auth password:
Advertise default: false
Default Route Cost: 1
Default TTL: 128
See also IP SET RIP HOSTROUTES
IP SET RIP POISON
4.1.8.2.64 IP SHOW APPSERVICE
Syntax IP SHOW APPSERVICE {<name>|<number>}
Description This A number of ISOS processes use the IP stack to provide services, such as SNMP
agent and TFTP server. These services are called AppServices.
This command shows system related information about the specified AppService. The command is typically
used for debugging purposes than for normal system configuration.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Option Description Default Value
name A name that identifies an existing AppService. To display
AppService names, use the ip list appservices command.
N/A
number A number that identifies an existing AppService. To dis-
play AppService numbers, use the ip list appservices
command. The number appears in the first column
under the heading ID.
N/A