User guide

IP TCP/IP command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-42
Description For information on setting DHCP client configuration options, see DHCP Client com-
mand reference.
4.1.8.2.45 IP SET INTERFACE GATEWAY
Syntax IP SET INTERFACE {<name>|<number>} GATEWAY {<IP-ADDRESS>}
Description This command specifies the gateway ip-address associated to the given interface
Note: This command is avalable on FIBER B,D,E MODULAR and ADSL B,C models only.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> ip set interface ip2 dhcp enabled
See also IP ADD ROUTE
IP SET INTERFACE MTU
IP LIST INTERFACES
For information on setting DHCP client configuration options, see DHCP Client command reference.
4.1.8.2.46 IP SET INTERFACE RIP ACCEPT
Syntax
IP SET INTERFACE {<name>|<number>} RIP ACCEPT {NONE|V1|V2|ALL}
Description This command specifies whether an existing interface accepts RIP messages. You can
specify what version of RIP messages are accepted by the interface.
When receiving RIP v1 messages, the IP stack tries to use the information it has available
to determine the appropriate subnet mask for the addresses received.
Option Description Default Value
name An existing IP interface. To display interface names, use
the ip list interfaces command.
N/A
number An existing IP interface. To display interface numbers,
use the ip list interfaces command. The number appears
in the first column under the heading ID.
N/A
ip-address The gateway ip-address N/A