User guide

TCP/IP command reference IP
4-29
iMG/RG Software Reference Manual (IPNetwork Functions)
Example --> ip interface ip1 delete secondaryipaddress 1
See also IP LIST INTERFACES
IP INTERFACE LIST SECONDARYIPADDRESSES
4.1.8.2.28 IP INTERFACE DELETE STATICARPENTRY
Syntax IP INTERFACE <name> DELETE STATICARPENTRY <number>
Description This command deletes a single static ARP entry that was created using the IP INTER-
FACE ADD STATICARPENTRY command.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> ip interface ip1 delete staticarpentry 2
See also ip list interfaces
ip interface list staticarpentries
4.1.8.2.29 IP INTERFACE LIST PROXYARPENTRIES
Syntax IP INTERFACE {<name>|<number>} LIST PROXYARPENTRIES
Description This command displays information about proxy ARP entries and exclusions that were
created using the IP INTERFACE ADD PROXYARPENTRY and IP INTERFACE ADD
PROXYARPEXCLUSION commands.
The following information is displayed:
secondary
ipaddress
number
The number that identifies a secondary IP address that you
want to delete from the main IP interface. To display sec-
ondary IP address numbers, use THE IP INTERFACE LIST
SECONDARYIPADDRESSES command. The number
appears in the first column under the heading ID.
N/A
Option Description Default Value
name An existing IP interface. To display interface names,
use the IP LIST INTERFACES command.
N/A
number An existing static ARP entry. To display static ARP
entry numbers, use the IP INTERFACE LIST
STATICARPENTRIES command.
N/A
Option Description Default Value