User guide

TCP/IP command reference IP
4-19
iMG/RG Software Reference Manual (IPNetwork Functions)
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
See also IP ADD INTERFACE
IP LIST INTERFACES
4.1.8.2.10 IP ATTACHVIRTUAL
Syntax IP ATTACHVIRTUAL <name> <real_interface>
Description This command creates a virtual interface. The virtual interface is associated with a ‘real’
IP interface that has already been attached to a transport using the IP attach command.
You can attach multiple virtual interfaces to one ‘real’ IP interface.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example --> ip attachvirtual ip_virtual ip_real
See also ip list interfaces
4.1.8.2.11 IP CLEAR ARPENTRIES
Syntax ip clear arpentries
Description This command clears all ARP entries.
Option Description Default Value
name An existing IP interface. To display interface names, use
the ip list interfaces command.
N/A
number An existing IP interface. To display interface numbers,
use the ip list interfaces command. The number appears
in the first column under the heading ID.
N/A
Option Description Default Value
name An existing IP interface to be used as a virtual interface.
The IP interface should not have a transport attached to
it. To display interface names, use the IP LIST INTER-
FACES command.
N/A
real_interface An existing ‘real’ IP interface, attached to a transport, to
which the virtual interface is associated with an existing
‘real’ IP interface. To display interface names, use the IP
LIST INTERFACES command.
N/A