User guide

IP TCP/IP command reference
iMG/RG Software Reference Manual (IPNetwork Functions)
4-18
See also ip list interfaces
ip add defaultroute gateway
ip add defaultroute interface
4.1.8.2.8 IP ATTACH
Syntax IP ATTACH {<name>|<number>} <transport>
Description This command attaches an existing transport to an existing IP interface (e.g., a bridge or
router) so that data can be transported via the selected transport method.
This command implicitly enables the transport being attached.
Options The following table gives the range of values for each option that can be specified with
this command and a Default Value (if applicable).
Example In the example below, eth1 is the name of an Ethernet transport created using the ETH-
ERNET ADD TRANSPORT command:
--> ip attach ip1 eth1
See also IP ADD INTERFACE
IP LIST INTERFACES
4.1.8.2.9 IP ATTACHBRIDGE
Syntax IP ATTACHBRIDGE {<name>|<number>}
Description This command attaches the bridge to the router via an existing IP interface.
Option Description Default Value
name An existing IP interface. To display interface names, use
the ip list interfaces command.
N/A
number An existing IP interface. To display interface numbers,
use the ip list interfaces command. The number appears
in the first column under the heading ID.
N/A
transport An existing transport. N/A