User guide
IGMP snooping IGMP Snooping command reference
iMG/RG Software Reference Manual (IGMP)
3-34
Example Æ igmp snooping disable vlan_video
See also IGMP SNOOPING ENABLE
3.1.5.1.34 IGMP SNOOPING ENABLE
Syntax IGMP SNOOPING ENABLE
Description This command enables the layer-2 IGMP snooping feature.
Default timeout values are used:
• leavetime10secs
• timeout270secs
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example Æ igmp snooping enable vlan_video
See also IGMP SNOOPING DISABLE
IGMP SNOOPING SET
3.1.5.1.35 IGMP SNOOPING SET SECONDARY-NETINTERFACE
Syntax IGMP SNOOPING SET SECONDARY-NETINTERFACE
<secondary_net_interface>
Description This command sets the ip address interface used as reference for the ip address value to
be replaced in the upstream IGMP signalling messages. The IGMP module will use this
secondary ip interface ONLY if the ip interface attached to the vlan where IGMP snoop-
ing has been enabled has null value (0.0.0.0). In the contrary all upstream IGMP signalling
Option Description Default value
vlan_name The name of an existing vlan where igmp snooping
has been previously enabled.
N/A
Option Description Default value
vlan_name The name of an existing vlan where igmp snooping
has been previously enabled.
N/A