User guide

IGMP Snooping command reference IGMP snooping
3-33
iMG/RG Software Reference Manual (IGMP)
Description This command displays the All the timer settings for the IGMP Proxy. This includes the
Robustness setting, Query Interval, Query response interval and the last member query
interval.
Example --> igmp proxy show status
IGMP Proxy configuration:
Robustness : 2
Query Int : 125
Query Rsp Int : 10
Last Member Query Int : 1
See also IGMP SET LASTMEMBERQUERYINT
IGMP SET QUERYINTERVAL|
IGMP SET QUERYRSPINTERVAL
IGMP SET ROBUSTNESS
3.1.5.1.32 IGMP SHOW UPSTREAMINTERFACE
Syntax IGMP SHOW UPSTREAMINTERFACE
Description This command displays the status of the upstream interface. If an upstream interface has
been set using the IGMP SET UPSTREAMINTERFACE command, this command displays
the current setting.
Example --> igmp show upstreaminterface
IGMP Proxy configuration
Upstream If : ip0
See also IGMP SET UPSTREAMINTERFACE
3.1.5.1.33 IGMP SNOOPING DISABLE
Syntax IGMP SNOOPING DISABLE <vlan_name>
Description This command disables the layer- 2 IGMP snooping feature previously enabled with the
IGMP SNOOPING ENABLE command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).