User guide

IGMP snooping IGMP Snooping command reference
iMG/RG Software Reference Manual (IGMP)
3-30
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> igmp set lastmberqueryintvl 5
See also IGMP SHOW STATUS
3.1.5.1.25 IGMP SET QUERYINTVL
Syntax IGMP SET QUERYINTVL < queryintvl >
Description This command sets the value for the query interval. The Query Interval is the time
between General Queries sent by the proxy Querier.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> igmp set queryintvl 200
See also IGMP SET QUERYRESPONSEINTVL
3.1.5.1.26 IGMP SET QUERYRESPONSEINTVL
Syntax IGMP SET QUERYRESPONSEINTVL < queryresponseintvl >
Description This command sets the value for the query response interval. The Max Response Time
inserted into the periodic General Queries.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default value
lastmberqueryintvl The last member query interval value in seconds.
Valid range is 1 to 255.
1
Option Description Default value
Queryintvl The query interval value in seconds. Query interval
cannot be less than or equal to the query response
interval. Valid range is 2 to 255
125