User guide
IGMP Snooping command reference IGMP snooping
3-27
iMG/RG Software Reference Manual (IGMP)
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set igmpsnoop security enable
See also BRIDGE LIST IGMPSNOOP SECURITY
3.1.5.1.19 BRIDGE SET IGMPSNOOP AUTOLEARNING
Syntax BRIDGE SET IGMPSNOOP SECURITY AUTOLEARNING <enable|disable>
Description This command activates or deactivates the ability of the security mechanism to learn
MAC addresses. When the system starts - only configured MAC addresses are populated
in the list of allowed MAC addresses. If AutoLearning is enabled, as new MAC addresses
are encountered, they are added to the list of valid MAC addresses - until the table has
reached the maximum size allowed. Once in the table, they cannot be removed, unless
the system is restarted. Once in the table - and the config is saved, they cannot be
removed except by a manual action.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set igmpsnoop security autolearning enable
See also BRIDGE LIST IGMPSNOOP SECURITY
3.1.5.1.20 BRIDGE SET IGMPSNOOP SECURITY MAXMACNUMBER
Syntax BRIDGE SET IGMPSNOOP SECURITY MAXMACNUMBER < num_macs >
Option Description Default value
enable/disable Activates or deactivates the service disable
Option Description Default value
enable/disable Activates or deactivates the service disable
Option Description Default value
enable/disable Activates or deactivates the autolearning feature disable