User guide

IGMP snooping IGMP Snooping command reference
iMG/RG Software Reference Manual (IGMP)
3-22
Query Interval: 41
Robustness Variable: 2
Query Response Interval: 3
V1 Timer Value: 133
Multicast Intf Aging Time: 133
IGMP Snoop Mode: snooponly
IGMP MAC Security: Disable
IGMP MAC Security Learning: Disable
IGMP MAC Security Max Number: 5
MAC Address 1: Empty
MAC Address 2: Empty
MAC Address 3: Empty
MAC Address 4: Empty
MAC Address 5: Empty
MAC Address 6: Empty
MAC Address 7: Empty
MAC Address 8: Empty
MAC Address 9: Empty
3.1.5.1.9 BRIDGE SET IGMPSNOOP
Syntax BRIDGE SET IGMPSNOOP { Enable | Disable | Drop }
Description This command turns on/off the IGMP snooping processes.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge set igmpsnoop enabled
See also BRIDGE SHOW
Option Description Default value
Enabled |
Disabled |
Drop
When Enabled, the IGMP process will intercept all
IGMP frames on the bridge and performs multicast
trunking by adding static multicast entries to the FDB.
When Disabled, the IGMP process removes all static
entries from the FDB and floods all multicast frames.
When Drop, the IGMP process will intercept all IGMP
frames on the bridge and not forward the packets.
Disabled