User guide

IGMP Snooping command reference IGMP snooping
3-21
iMG/RG Software Reference Manual (IGMP)
3.1.5.1.5 BRIDGE LIST IGMPSNOOP GROUPINFO
Syntax BRIDGE LIST IGMPSNOOP GROUPINFO
Description This command displays all of the multicast groups in the IGMP database.
Example --> bridge set igmpsnoop groupinfo
3.1.5.1.6 BRIDGE LIST IGMPSNOOP INTERFACESTATS
Syntax BRIDGE LIST IGMPSNOOP INTERFACESTATS
Description This command displays IGMP packet statistics collected for each interface on the bridge.
3.1.5.1.7 BRIDGE LIST IGMPSNOOP STATIC MCASTROUTERINTFS
Syntax BRIDGE LIST IGMPSNOOP STATIC MCASTROUTERINTFS
Description This command allows the user to list all previously added static multicast router inter-
faces and the manner in which they were added.
Description --> bridge list igmpsnoop static mcastrouterintfcs
Bridge Interfaces:
Name | Type
---------------
ethe0 | static
---------------
3.1.5.1.8 BRIDGE LIST IGMPSNOOP SECURITY
Syntax BRIDGE LIST IGMPSNOOP SECURITY
Description This command allows the user to display the IGMP information associated with IGMP
Seccurity to include the configuration - enabled or disabled, the maximum number of
MAC Addresses allowed and whether or not MAX Addresses can be learned. Learned
MACs are sticky - in that if one is learned, then a system restart - or provisioning action
is required to remove it.
Example --> bridge list igmpsnoop security
IGMP Snoop Configuration:
IGMP Snoop: Disable
IGMP Net Interface: ip0
IGMP Enabled Vlan: -1
Default Fast Leave Enable
Last Member Query Interval: 0