User guide

IGMP snooping IGMP Snooping command reference
iMG/RG Software Reference Manual (IGMP)
3-20
Example --> bridge add igmpsnoop security firstSTB mac 00:01:02:03:04:05
See also BRIDGE LIST IGMPSNOOP SECURITY
3.1.5.1.3 BRIDGE DELETE IGMPSNOOP MCASTROUTERINTF
Syntax BRIDGE DELETE IGMPSNOOP MCASTROUTERINTF <interface name>
Description This command allows the user to delete a previously added static multicast router inter-
face. The interface reverts to a downstream interface after deletion.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge delete igmpsnoop mcastrouterintf eth0
3.1.5.1.4 BRIDGE DELETE IGMPSNOOP SECURITY
Syntax BRIDGE DELETE IGMPSNOOP SECURITY <mac_name|mac_number|ALL>
Description This command allows the user to delete one or all static mac address from the list of
mac addresses that are authorized to be provided video service via IGMP.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge delete igmpsnoop security All
See also BRIDGE LIST IGMPSNOOP SECURITY
Option Description Default value
interface_name The name of a bridge interface that has previously been
added and attached to a transport using the bridge add
interface and bridge attach CLI commands.
N/A
Option Description Default value
mac_name The name of this particular entry in the MAC table N/A
mac_number The number of the particular entry in the MAC Table N/A
ALL All entries