User guide

VLAN VLAN command reference
iMG/RG Software Reference Manual (Switching)
2-112
The VLAN name can be 16 characters length; it cannot start with a digit and cannot con-
tain dots '.' or the slash symbols '/'.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Name Description Default Value
Vlanname An arbitrary name that identifies the VLAN. The name
must not be already in use for another VLAN. The VLAN
name can be at most 16 chars long.
N/A
Vlanid The VLANID parameter specifies a unique VLAN Identi-
fier (VID) for the VLAN.
If tagged ports are added to this VLAN, the specified VID
is used in the VID field of the tag in outgoing frames.
If untagged ports are added to this VLAN, the specified
VID only acts as an identifier for the VLAN in the For-
warding Database. The default port based VLAN has a VID
of 1.
N/A