User guide

VLAN VLAN command reference
iMG/RG Software Reference Manual (Switching)
2-108
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> vlan clear voip
See also VLAN LIST
2.4.4.1.21 VLAN CREATE
Syntax VLAN CREATE < vlanname > < vlanid >
Description This command defines a new VLAN and specifies the corresponding VLAN identifier
(VID).
The VLAN name can be 16 characters length; it cannot start with a digit and cannot con-
tain dots '.' or the slash symbols '/'.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> vlan create voip vid 10
--> vlan create wan_net 20
--> vlan create lan_net 20
--> vlan add interface wan_net wan frame tagged
--> vlan add interface lan_net lan1 frame untagged
Name Description Default Value
Vlanname An existing VLAN. To display the existing VLANs, use
the VLAN LIST command.
N/A
Option Description Default Value
Vlanname An arbitrary name that identifies the VLAN. The name
must not be already in use for another VLAN. The
VLAN name can be at most 16 chars long.
N/A
Vlanid The VLANID parameter specifies a unique VLAN Iden-
tifier (VID) for the VLAN.
If tagged ports are added to this VLAN, the specified
VID is used in the VID field of the tag in outgoing
frames.
If untagged ports are added to this VLAN, the specified
VID only acts as an identifier for the VLAN in the For-
warding Database. The default port based VLAN has a
VID of 1.
N/A