User guide

VLAN VLAN command reference
iMG/RG Software Reference Manual (Switching)
2-106
Example --> vlan add voip lan1 frame tagged
See also VLAN LIST
2.4.4.1.18 VLAN ADD PORT
Syntax VLAN ADD <vlanname> PORT <portname> FRAME {TAGGED |
UNTAGGED}
Description This command adds an Ethernet port to an existing named VLAN that has been created
with the command VLAN ADD VID.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example vlan add voip port lan1 frame untagged
See also VLAN SHOW
2.4.4.1.19 VLAN ADD VID
Syntax
VLAN ADD <vlanname> VID <vlanID> [802.1p_priority <priority>]
TAGGED/
UNTAGGED
Specify if the switch port must be set as tagged or
untagged port for the selected vlan.
N/A
Name Description Default Value
vlanname An existing VLAN. To display the existing VLANs,
use the VLAN SHOW command.
N/A
portname A name that identifies an Ethernet port. Valid port
names (case insensitive) are lan1, lan2, lan3 and lan4.
N/A
FRAME The FRAME parameter specifies whether a VLAN
tag header is included in each frame transmitted on
the specified ports.
If tagged is specified, a VLAN tag is added to frames
prior to transmission. The port is then called a
tagged port for this VLAN.
If untagged is specified, the frame is transmitted
without a VLAN tag. The port is then called an
untagged port for this VLAN.
N/A
Name Description Default Value