User guide

VLAN command reference VLAN
2-105
iMG/RG Software Reference Manual (Switching)
2.4.4.1.16 BRIDGEVLAN LIST TRANSPORTS
Syntax BRIDGEVLAN LIST TRANSPORTS
Description This command displays information about all of the configured VLAN transports. See
bridgevlan add transport on page 62. The following fields are displayed:
• IDThe numerical identifier automatically assigned to the object when it was created.
• NameThe name that identifies an existing VLAN transport.
• VLAN IDThe numerical identifier automatically assigned to the VLAN object when it
was created.
• IP InterfaceIP interface associated with the transport, if any.
Options None
Example bridgevlan list transports
See also bridgevlan add transport
ip interface attachbridgevlan
2.4.4.1.17 VLAN ADD
Syntax VLAN ADD < vlanname > < portname > FRAME { TAGGED | UNTAGGED
}
Description This command adds an Ethernet port to an existing named VLAN that has been created
with the command VLAN ADD VID.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Name Description Default Value
Vlanname An existing VLAN. To display the existing VLANs, use
the VLAN LIST command.
N/A
Portname The name of the switch port to be configured. Avail-
able ports are:
lan1
lan2
lan3
lan4
lan5
lan6
cpu
N/A