User guide

VLAN VLAN command reference
iMG/RG Software Reference Manual (Switching)
2-102
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge clear vlaninterfaces
See also BRIDGE ADD VLAN
BRIDGE ADD VLANINTERFACE
BRIDGE LIST STATIC VLANS
BRIDGE LIST VLANS
2.4.4.1.12 BRIDGE DELETE VLANINTERFACE
Syntax
BRIDGE DELETE VLANINTERFaCE {<name>|<number>} <interfacename>
Description This command removes an interface from the egress interface list of the named VLAN.
Name Description Default Value
Name A name that identifies an existing VLAN. To display the
list of statically configured VLANs, use bridge list static
vlans. To display the list of all the static and dynamic
VLANs in the bridge use bridge list vlans CLI com-
mand. This command also displays the egress interface
list for each VLAN.
N/A
Number A number that identifies an existing VLAN. To display
the list of statically configured VLANs, use the bridge
list static vlans command. The number appears in the
first column under the heading ID.
N/A
Tagged Removes all the tagged interfaces from the egress
interface list of the VLAN. If no tagged / untagged
option is given in this command, all the egress inter-
faces are removed from the VLAN.
N/A
Untagged Removes all the untagged interfaces from the egress
interface list of the VLAN. If no tagged / untagged
option is given in this command, all the egress inter-
faces are removed from the VLAN.
N/A