User guide

VLAN command reference VLAN
2-99
iMG/RG Software Reference Manual (Switching)
--> bridge clear interfacevlanstats VLAN_1
--> bridge clear interfacevlanstats VLAN_1 bridge1
See also BRIDGE ADD VLAN
BRIDGE ADD VLANINTERFACE
BRIDGE LIST INTERFACEVLANSTATS
2.4.4.1.8 BRIDGE LIST INTERFACEVLANSTATS
Syntax
BRIDGE LIST INTERFACEVLANSTATS { < vlanname > | < vlannumber >
}
Description This command displays the statistical information of the egress interfaces of the named
VLAN.
• Name: The name of an existing VLAN. See bridge add vlan CLI command to configure a new VLAN.
• Rx Frames: The number of frames received on the interface for the named VLAN.
• Tx Frames: The number of frames transmitted from the interface for the named VLAN.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge list interfacevlanstats VLAN_1
Interfaces Stats for the VLAN: VLAN_1
Name | Rx Frames | Tx Frames
---------|-----------|-------------
bridge1 | 56 | 72
-----------------------------------
See also BRIDGE ADD VLAN
BRIDGE ADD VLANINTERFACE
BRIDGE CLEAR INTERFACEVLANSTATS
Name Description Default Value
Vlanname The name of an existing VLAN. See bridge add vlan CLI
command to configure a new VLAN.
N/A
Vlannumber A number that identifies an existing VLAN. To display
the list of statically configured VLANs, use the bridge
list static vlans command. The number appears in the
first column under the heading ID.
N/A