User guide

VLAN VLAN command reference
iMG/RG Software Reference Manual (Switching)
2-98
Example --> bridge show vlan VLAN_1
VLAN: VLAN_1
VLAN Id: 2
Filtering Database: FDB_1
Tagged Interfaces: bridge1
Untagged Interfaces: bridge2
See also BRIDGE ADD VLAN
BRIDGE ADD VLANINTERFACE
BRIDGE LIST STATIC VLANS
BRIDGE LIST VLANS
2.4.4.1.7 BRIDGE CLEAR INTERFACEVLANSTATS
Syntax BRIDGE CLEAR INTERFACEVLANSTATS [{<vlanname>|<vlannumber>}
[<interfacename>]]
Description This command clears the statistics for:
• All the egress interfaces across all the VLANs.
• All the egress interfaces for the named VLAN.
• A particular egress interface for the named VLAN.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge clear interfacevlanstats
Number A number that identifies an existing VLAN. To display
the list of statically configured VLANs, use the bridge
list static vlans command. The number appears in the
first column under the heading ID.
N/A
Name Description Default Value
Vlanname The name of an existing VLAN. See bridge add vlan
CLI command to configure a new VLAN.
N/A
Vlannumber A number that identifies an existing VLAN. To display
the list of statically configured VLANs, use the bridge
list static vlans command. The number appears in the
first column under the heading ID.
N/A
Interfacename The name of an egress interface of the VLAN. N/A
Name Description Default Value