User guide

VLAN command reference VLAN

2-97

iMG/RG Software Reference Manual (Switching)

----------------------------------------------------------

..1.|.2.......|.VLAN_1.....|.FDB_1.....|.static..|

Tagged Interfaces: bridge1

Untagged Interfaces: bridge2

-------------------------------------------------------------

See also BRIDGE ADD VLAN

BRIDGE ADD VLANINTERFACE

BRIDGE LIST STATIC VLANS

2.4.4.1.6 BRIDGE SHOW VLAN

Syntax BRIDGE SHOW VLAN {< name >|<number>}

Description This command displays a single statically configured VLAN. See bridge add vlan CLI com-

mand to statically configure a VLAN. The command displays all the statically added egress

interfaces of the VLAN. See bridge add vlaninterface CLI command to add an interface to

a VLAN.

• VLAN: A name that identifies an existing statically-configured VLAN.

• VLAN ID: A number that identifies an existing statically-configured VLAN.

• Filtering Database: The name of an existing filtering database to which the filtering entry will be added. See

Note on filtering database in this command.

• Tagged Interfaces: Tagged egress interface list.

• Untagged Interfaces: Untagged egress interface list.

Options The following table gives the range of values for each option that can be specified with

this command and a default value (if applicable)

Name Description Default Value

Name A name that identifies an existing VLAN. To display the

list of statically configured VLANs, use bridge list static

vlans. To display the list of all the static and dynamic

VLANs in the bridge use bridge list vlans CLI com-

mand. This command also displays the egress interface

list for each VLAN.

N/A