User guide

VLAN command reference VLAN
2-95
iMG/RG Software Reference Manual (Switching)
See also BRIDGE DELETE VLAN
BRIDGE LIST STATIC VLAN
BRIDGE LIST VLANS
2.4.4.1.2 BRIDGE CLEAR VLANS
Syntax BRIDGE CLEAR VLANS
Description This command deletes the statically configured VLANs from the bridge. The egress inter-
faces and multicast filtering entries (for an IVM configuration) associated with the VLANs
are also deleted by this command. If a VLAN is the last VLAN associated with its FDB,
the FDB along with the unicast and multicast filtering entries and forward all/unregistered
group entries are also deleted from the bridge.
Example --> bridge add interface bridge1
See also BRIDGE ADD VLANS
BRIDGE DELETE VLAN
2.4.4.1.3 BRIDGE DELETE VLAN
Syntax BRIDGE DELETE VLAN {<name>|<number>}
Description This command deletes a single statically configured VLAN.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge delete vlan VLAN_1
See also BRIDGE ADD VLAN
BRIDGE LIST STATIC VLANS
BRIDGE LIST VLANS
Name Description Default Value
Name A name that identifies an existing VLAN. To display the
list of statically configured VLANs, use bridge list static
vlans. To display the list of all the static and dynamic
VLANs in the bridge use bridge list vlans CLI command
N/A
Number A number that identifies an existing VLAN. To display
the list of statically configured VLANs, use the bridge
list static vlans command. The number appears in the
first column under the heading ID.
N/A